Top Question

Anything and everything to do with ascMcLaren cars can go here.
Post Reply
User avatar
ROG
Posts: 13
Joined: Mon Feb 18, 2008 12:04 am
Location: Freehold
Contact:

Top Question

Post by ROG »

My top on the driverside and passenger side dosen't close completly. It is the section behind each window about 6 to 7 inches long. Am I missing some type of seal or something.... Thanks RO'G
1988 ASC McLaren white
User avatar
ProTouringASC
Posts: 340
Joined: Mon Sep 18, 2006 2:06 pm
Location: Lenoir City, TN
Contact:

Post by ProTouringASC »

Got a pic of the area? From you description, I am not sure if the top isn't properly attached to the frame, or if the weather stripping is missing.

Shiny Side Up!
Bill
...it is their right, it is their duty, to throw off such government, and to provide new guards for their future security.
User avatar
ROG
Posts: 13
Joined: Mon Feb 18, 2008 12:04 am
Location: Freehold
Contact:

Post by ROG »

It's the bottom part of the top. Pictures are in my gallery... Thanks[/img]
1988 ASC McLaren white
User avatar
ProTouringASC
Posts: 340
Joined: Mon Sep 18, 2006 2:06 pm
Location: Lenoir City, TN
Contact:

Post by ProTouringASC »

Looks to me like the top has shrunk, and possible pulled loose from where it connects to the framing. Mine has a similar problem and so will be getting a new top this spring.

Shiny Side Up!
Bill
...it is their right, it is their duty, to throw off such government, and to provide new guards for their future security.
User avatar
ROG
Posts: 13
Joined: Mon Feb 18, 2008 12:04 am
Location: Freehold
Contact:

Post by ROG »

There is no place for the top to connect to the framing...

RO'G
1988 ASC McLaren white
User avatar
ProTouringASC
Posts: 340
Joined: Mon Sep 18, 2006 2:06 pm
Location: Lenoir City, TN
Contact:

Post by ProTouringASC »

ROG wrote:There is no place for the top to connect to the framing...

RO'G
I apologize, I didn't explain that quite right. I was referring to the spot at the side window where the top connects. On my car, this has torn loose, allowing the top to pull out and exacerbate the gap as seen on your car.

Shiny Side Up!
Bill
...it is their right, it is their duty, to throw off such government, and to provide new guards for their future security.
detroits most wanted
Posts: 11
Joined: Fri Oct 12, 2007 12:56 am
Location: atlanta, ga

convertable top

Post by detroits most wanted »

let me chime in. the problem your having is similar to mines, from what I saw the space is small,,,,,,,,,,mines has a gap from the same point to about 75 percent around the trunk area just to about the latch.....I took I took it to auto upolstry shop and was told that who ever put the top on, put it on too tight and didnt allow for it to shrink,, once it did shrink it bent the bow portion of the frame, pulled it upward to the point that I have a lift or space on the sides. now he told me that I need a new bow for the frame thats bent, I havent seen that on the parts list........so I guess that I'm kind of stuck... plus the top wasnt good of quality
User avatar
tfs2121
Posts: 1793
Joined: Sun Aug 29, 2004 12:08 am
Location: Commerce, MI
Contact:

Post by tfs2121 »

hank has alot more parts then what is listed on his website. try giving him a call.
~Peter
1985 ASC McLaren Coupe
User avatar
ASCMCLRN
Posts: 813
Joined: Sun Sep 26, 2004 3:55 am
Contact:

Post by ASCMCLRN »

I know this post is kind of old but I havent been around to much lately. Just wanted to say that my 87 has the exact same problem and I know the person who owned it before me always kept the car meticulously maintened. So I would have to say its just a problem as our cars age, nothing defective or broken about it.

Nick
Post Reply