Please ...I need a little help?

Jori Rintamaki · Post by **Jori Rintamaki** » Thu Apr 02, 2009 5:52 am

I have a new paint, new top and etc.... So I promised my car to the Oulu car show. Yesterday I looked for these trims and I cant used the old ones anymore. They are in very bad shape.
Where Can I buy new ones?
I have only two weeks time left to fix the car!
Please, if someone can help me to find a shop where I can buy the trims,
let me know asap!

plumkrazy · Post by **plumkrazy** » Thu Apr 02, 2009 10:38 am

http://www.foxmustangrestoration.com/?p=pr&catid=40

I also think they have 85/86 door molding but you have to ask/call

Sandy · Post by **Sandy** » Thu Apr 02, 2009 1:03 pm

and you'll find the guy who owns / runs this business is a real sweetheart of a guy to do business with! VERY helpful & sincere !!

tfs2121 · Post by **tfs2121** » Thu Apr 02, 2009 1:22 pm

you can reuse the old ones if you remove the metalic backing that the tape was on.

lay the body molding on the flat ground in the sun. then clean them. paint them. and reinstall

Jori Rintamaki · Post by **Jori Rintamaki** » Thu Apr 02, 2009 1:49 pm

Ok. Thank you all. I´ll try my best .
I´ll call tomorrow and if they dont have
I´ll try to fix. Some guy sended me also email and told he have all six
NOS mouldings. Maybe he make contact to me later!
Thanks
Jori

Post by **negusm** » Thu Apr 02, 2009 2:31 pm

tfs2121 wrote:you can reuse the old ones if you remove the metalic backing that the tape was on.

lay the body molding on the flat ground in the sun. then clean them. paint them. and reinstall

On the door one, do NOT remove the metal backing. The trim will shrink 2"! and look terrible!

The smaller ones are no problem as they are too small to shrink substantially.

-Mike

Jori Rintamaki · Post by **Jori Rintamaki** » Thu Apr 02, 2009 2:51 pm

I visited at FMR sites before but in their catalogue there is
no door moulding for -85.
Anyway I´ll try to call them and ask if they have?

We have in Finland one factory who makes anykind of mouldings and
tomorrow I´ll call them also. I have a model so maybe they can make a newones!
If they can make a newones it cost a lot for me but after first mouldings
it is very cheap....Only the first ones coast a lot because they have to make a mold first.

aargh.....Sorry about my bad English!!!

Post by **negusm** » Thu Apr 02, 2009 2:54 pm

Contact FMR directly. Most things he has in very small quantities are NOT on his web site.

If you can get mouldings reproduced, he would like to talk with you about it as well.

-Mike

Jori Rintamaki · Post by **Jori Rintamaki** » Thu Apr 02, 2009 2:57 pm

Ok!
Thank you Mike!!!

hippys86coupe · Post by **hippys86coupe** » Thu Apr 02, 2009 3:23 pm

I have all 6 moldings , NOS I paid alot for,took 3 years to put complete set together,and then I didn't even put them on my car. I will consider selling them,open to offers.

scoutdrivinrebel · Post by **scoutdrivinrebel** » Fri Apr 03, 2009 1:32 am

hippys86coupe wrote:I have all 6 moldings , NOS I paid alot for,took 3 years to put complete set together,and then I didn't even put them on my car. I will consider selling them,open to offers.

Hey Ron, keep those, I'll need them when I eventually buy your car.

ascMcLaren Enthusiasts

Please ...I need a little help?

Please ...I need a little help?

moldings

Re: moldings