Turn signal switch

Havoc · Post by **Havoc** » Sat Dec 04, 2010 10:34 pm

I bought a new one however cant seem to get my stem out of the old switch. Any Advise?

Havoc · Post by **Havoc** » Sat Dec 04, 2010 11:54 pm

Got it off.... had to take the stem and the dohicky it sits in. Then whack the other end to disengage the little lip on the stem.

Post by **negusm** » Sun Dec 05, 2010 2:13 am

It pulls straight out.

Often the plastic part which cracks pulls off the metal stem.

Just take channel locks or pliers and grab the stem and pull STRAIGHT out.

-Mike

Havoc · Post by **Havoc** » Sun Dec 05, 2010 2:49 am

Yea, Mine didn't want to come out at first and I was afraid of breaking the stem. I tapped it on the ground and it came out.