I was reviewing the top installation instructions in the service manual on Hank's site and have a question. It says to use "nitrile cement" or "neoprene weatherstrip adhesive." What are each of these and should they be readily available at the local auto parts chain store?
Thanks, Keith
New top installation question
New top installation question
1986 ASC vert - #86-0001
1986 ASC vert - 3.8SC v6
1986 ASC vert - Silver/Black/Gray
1985 ASC vert - Black/Tan/Tan
1985 GPIV - The Official Pace Car
1985 ASC coupe - modified
1985 ASC coupe - roller
1983 Crimson Cat V6
1966 Cobra replica
1986 ASC vert - 3.8SC v6
1986 ASC vert - Silver/Black/Gray
1985 ASC vert - Black/Tan/Tan
1985 GPIV - The Official Pace Car
1985 ASC coupe - modified
1985 ASC coupe - roller
1983 Crimson Cat V6
1966 Cobra replica
Buy the yellow super weatherstrip adhesive. I've used it twice and it has worked great. Bought it at Autozone for $7.99. I use 1-1/2 tubes on an installation.
Set it up and let it dry till it is tacky. Press the parts together and they are not coming apart without some effort. If you screw it up it's still fixable, though.
Set it up and let it dry till it is tacky. Press the parts together and they are not coming apart without some effort. If you screw it up it's still fixable, though.
1988 ASC McLaren #709